Executive Profile

•        A highly skilled engineer and leader with close to 12 years of experience in shipboard machinery maintenance and ship cargo operations

•        An excellent ability to manage teams and driving them to deliver high performance

Organizational Experience      

Profile Summary:                                                                                                                

Responsible for:

•        Treating safety and environmental compliance as a top priority.

•        Reporting any unsafe acts or failure to comply with regulations and/or company procedures to the Master.

•        Ensuring that company policies and procedures are followed to provide a safe working environment and minimize the potential for pollution.

•        Being thoroughly familiar and able to take charge of on-site emergency countermeasures with all on board firefighting and life-saving equipment.

•        Relieving the Chief Engineer at the engine control room when standby conditions are extended.

•        Keeping the Chief Engineer informed on any matter that affects the engine department.

•        Being fully aware of the need to make risk analysis a part of the daily routine. Working with, demonstrating, and encouraging all personnel to enforce safety awareness at all times.

•        Executing correctly and promptly the Chief Engineer's orders and reporting to that effect.

•        Consulting daily with the Chief Engineer concerning the work necessary for the maintenance and upkeep of the engine department and taking part in the shipboard management meetings.

•        Supervising all engine staff, workshop, stores, maintenance and repairs.

•        Maintaining records of engine room staff’s work done, rest and overtime hours when applicable.

•        Ensuring cleanliness and safe practices within the spaces allocated to the engine department.

•        Ensuring engine room staff wears appropriate PPE(personnel protective equipment) suited to the tasks during work in the engine room, and follows safe practices, discipline and good housekeeping.

•        Ensuring correct, safe and periodical control and maintenance of electrical equipment and installation.

•        Assisting Chief Engineer in training of junior officers, cadets and crew in all aspects of engine room operation, best practices, safety, and pollution prevention.

•        Recording the incineration of plastics, waste materials, and shore disposal of plastic clinker.

•        Daily upkeep of Planned Maintenance System.

•        Recording the incineration of plastics, waste materials, and shore disposal of plastic clinker in Garbage Log (in co-operation with Chief Officer).

•        Routinely testing all alarms and trips according to the planned maintenance system for IGS(inert gas systems) and the calibration of the IGS fixed oxygen analyzer in co-operation with Chief Officer.

•        Ensuring the spares and stores are updated regularly in the Planned Maintenance System.

•        Ensuring that lubrication of engine room equipment is carried out as per the planned maintenance schedule.

•        Maintaining machinery as per the Planned Maintenance System.

•        Ensuring that the bilge overboard valve is locked shut at all times except when pumping bilges, and that the key is returned to the Chief Engineer after every overboard pumping operation.

•        Familiarizing self with duties of the next senior rank(chief engineer).

•        Performing any other duties as required by the Master or Chief Engineer.

Profile Summary:

Responsible for:

•         Treating safety and environmental compliance as a top priority

•         Reporting any unsafe acts or failure to comply with regulations and/or company procedures to the Master.

•         Perform watches as required by the Chief Engineer.

•         Be thoroughly familiar with all on board firefighting and life-saving equipment and installations.

•         Set an example to his / her watch members in safety and ensure that staff wear appropriate PPE and follow safe working practices, cleanliness, discipline, and good housekeeping.

Main Duties

•        Ensuring the condition and maintenance of:

•        Diesel generators and associated equipment.

•        Emergency generator.

•        Cargo and ballast pump turbines or motors / hatches and handling equipment.

•        Fuel oil and lube oil pumps.

•        Main engine and diesel generator fuel valve testing as directed by the 1st Assistant Engineer.

•        Duties defined in the Chief Engineers standing orders.

•        Recording maintenance details / spares used for equipment under his / her responsibility in the Planned Maintenance System.

•        Maintaining inventories of spare parts and tools for equipment under his/her responsibility in consultation with the 1st Assistant Engineer in the Planned Maintenance System                                                                     

Profile Summary:  

Responsible for, performing duties, as directed by the 1st Engineer. Duties include:

•        Learning the safety procedures on board the vessel and complete the Welcome on Board process as soon as possible.

•        Learning the duties and responsibilities of the Wiper and Oiler under the supervision of the Engineering officers using the engine rating competencies as a guide and to be completed within 3 months from embarkation.

•        Complying with all safety procedures and carrying out all work safely. Complete all safety related competencies for the engine rating rank within the first 3 months of the first tour of duty.

•        Reporting any unsafe acts or failure to comply with regulations and/or company procedures to the Onboard Safety Officer / Master.

•        Ensuring that proper personal protective equipment (PPE) is worn whenever required for the task being carried out

•        Assisting in performing maintenance of engine room machinery, equipment, spaces and bilges.

•        Reporting any defects noted immediately to engineering officer and 1st Engineer.

•        Participating in ship security measures and pirate watch as directed by the Master through the 1st Engineer.

•        Promoting and maintaining discipline in the Engine Department.

•        Promoting good personnel relations and harmony on board.

•        Participating in emergency drills, safety exercises and meetings.

•        Performing the duties outlined in the Muster List and following instructions by the Master or Emergency Party Leader.

•        Performing any other duties as required by the Chief Engineer.

Certifications and Trainings

Academic and Personal Section